When you would like to secure affordable procurement options for Lockheed Martin Corporation part number 669338-13, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Lockheed Martin Corporation part number 669338-13 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1680-00-027-5747 Item PartTypeName: SHAFT ASSEMBLY,FLEXIBLE | 1680 | 000275747 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 669338-13 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3 BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AASA | THREAD LENGTH | 1.500 INCHES NOMINAL BOTH ENDS |
| AAUJ | SPLINE MAJOR DIAMETER | 0.297 INCHES NOMINAL FIRST END |
| ABHP | OVERALL LENGTH | 19.569 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 12 FIRST END |
| ABSC | SPLINE MINOR DIAMETER | 0.235 INCHES NOMINAL FIRST END |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| AEDN | TIP LENGTH | 0.438 INCHES NOMINAL FIRST END |
| AEDN | TIP LENGTH | 0.469 INCHES NOMINAL SECOND END |
| AGGZ | SHANK OUTSIDE DIAMETER | 0.406 INCHES NOMINAL BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL FIRST END |
| AGPX | SHOULDER OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| AJXJ | CORE MATERIAL | STEEL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF BOTH ENDS |
| AKMH | CORE DIAMETER | 0.187 INCHES NOMINAL |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| APTD | END TYPE | ROUND,INTERNAL SPLINED FIRST END |
| APTD | END TYPE | THREADED MALE SECOND END |
| AWZY | END CONNECTION TYPE | THREADED INTERNAL BOTH ENDS |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 FIRST END |
| AXFH | SPLINE LENGTH | 0.250 INCHES NOMINAL FIRST END |
| AXFK | TONGUE LENGTH | 0.469 INCHES NOMINAL SECOND END |
| AXYS | SPLINE TYPE | INVOLUTE FIRST END |
| BDRL | SETSCREW | NOT INCLUDED BOTH ENDS |
| BJPS | CASING MATERIAL | STEEL |
| BPPL | WRENCHING FACILITY TYPE | KNURLED SURFACE BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.187 INCHES NOMINAL DIAMETER FIRST END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.250 INCHES NOMINAL DIAMETER SECOND END |
| CFRM | TORSIONAL DEFLECTION RATING | 2.0 DEG FT-LB IN. TORSIONAL DEFLECTION RATING FOR WINDING,4.0 DEG FT-LB IN. TORSIONAL RATING FOR UNWINDING |
| CFRN | CASING SURFACE TREATMENT | ZINC COATED |
| CFRP | CASING LENGTH BETWEEN FERRULES | 18.500 INCHES NOMINAL |
| CFRQ | CASING OUTSIDE DIAMETER | 0.273 INCHES NOMINAL |
| CFRR | CASING PROTECTIVE DEVICE TYPE | PLASTIC COVER |
| CFRT | SWIVEL END | NOT PROVIDED BOTH ENDS |
| CFRW | END OVERALL DIAMETER | 1.000 INCHES NOMINAL BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFRZ | CORE OVERALL LENGTH | 19.469 INCHES NOMINAL |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSF | CORE TIP THREAD CLASS | 2 SECOND END |
| CFSH | CORE TIP THREAD DIRECTION | RIGHT-HAND SECOND END |
| CFSJ | CORE TIP THREAD LENGTH | 0.750 INCHES NOMINAL SECOND END |
| CFSL | CORE REMOVABILITY | REMOVABLE |
| CGDN | MINIMUM OPERATING RADIUS | 3.500 INCHES |
| FEAT | SPECIAL FEATURES | 60 IN.-LBS TORSION STRENGTH IN UNWINDING DIRECTION |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
