| MRC | Criteria | Characteristic |
|---|
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.332 INCHES MINIMUM AND 0.348 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.492 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.095 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CSCF | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | STEEL COMP 303 |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE |
| CXCG | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS,TROY |
| AAJD | THREAD CLASS | 2A |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CQYH | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CSWM | SHELL SURFACE TREATMENT | PASSIVATE |
| AAQL | BODY STYLE | ANGLE SHAPE,EXTERNAL COUPLING |
| ABHP | OVERALL LENGTH | 0.710 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| AFQL | DISTANCE FROM MOUNTING SHOULDER TO REAR FACE | 0.302 INCHES MINIMUM AND 0.318 INCHES MAXIMUM |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | SMA SINGLE MATING END |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CMLP | THREAD QUANTITY PER INCH | 36 |
| CQTM | TERMINAL LOCATION | SIDE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530,HALF HARD FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CTKL | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| PRMT | PRECIOUS MATERIAL | GOLD |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABKH | BUSHING DIAMETER | 0.049 INCHES MINIMUM AND 0.051 INCHES MAXIMUM |
| ABKW | OVERALL HEIGHT | 0.739 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.332 INCHES MINIMUM AND 0.348 INCHES MAXIMUM |
| AFQN | FLANGE LENGTH | 0.492 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| AFQW | MATING END QUANTITY | 1 |
| AFRF | CONTACT MAXIMUM FREQUENCY RATING | 18.0 GIGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRT | SHELL TYPE | SOLID |
| AWTN | OPERATING TEMP RATING | 55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TY 1,GRADE C,CL 2 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND MIL-C-14550,CL 4 MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
