| MRC | Criteria | Characteristic |
|---|
| CQYH | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQW | MATING END QUANTITY | 1 |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE |
| AAQL | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| AFRD | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CXCL | INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT AND SHELL SURFACE GOLD |
| CSCF | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| AFRT | SHELL TYPE | SOLID |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | NONSTD SINGLE MATING END |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| ABMK | OVERALL WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END |
| ABHP | OVERALL LENGTH | 0.565 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.105 GOLD GRAINS, TROY |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.330 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| AFRF | CONTACT MAXIMUM FREQUENCY RATING | 18000.0 MEGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.310 INCHES NOMINAL |
| PRMT | PRECIOUS MATERIAL | GOLD |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CSWM | SHELL SURFACE TREATMENT | GOLD |
| CXCG | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKH | BUSHING DIAMETER | 0.250 INCHES MINIMUM |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| CMLP | THREAD QUANTITY PER INCH | 36 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.102 INCHES NOMINAL |
| TEST | TEST DATA DOCUMENT | 49956-154777 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THSD | THREAD SERIES DESIGNATOR | UNS |
| CQTM | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.330 INCHES MINIMUM AND |
| CSPT | SHELL MATERIAL | STEEL COMP 303 |
| AAJD | THREAD CLASS | 2A |
| ABKW | OVERALL HEIGHT | 0.510 INCHES MAXIMUM |
| ADZC | ENVIRONMENTAL PROTECTION | PRESSURE PROOF AND |
