| MRC | Criteria | Characteristic |
|---|
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.920 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.0007 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.086 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | 5.0 TO 5.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1.0/1.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 89954-892C796 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 90.0 |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.666 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.560 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFK | MAXIMUM STARTING TORQUE | 0.10 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.10 INCH-OUNCES |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 38.88 KILOHMS SINGLE SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 80.0 SINGLE SECTION AND 170.0 SINGLE SECTION AND 260.0 SINGLE SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 0.50/0.50 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
