| MRC | Criteria | Characteristic |
|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL FIRST END,FIFTH PORTION |
| ABHP | OVERALL LENGTH | 17.188 INCHES NOMINAL |
| ABRR | KEYWAY WIDTH | 0.312 INCHES NOMINAL FIRST END,FIFTH PORTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SAE FIRST END,FIFTH PORTION |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND FIRST END,FIFTH PORTION |
| BYFR | TEETH HARDNESS RATING | 56.3 ROCKWELL C MINIMUM AND 62.5 ROCKWELL C MAXIMUM |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | 0.9375 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 27.500 |
| CFFG | WORM HELIX ANGLE | 5 DEG 41 MIN |
| CFFK | WORM OUTSIDE DIAMETER | 3.596 INCHES NOMINAL |
| CFFL | WORM PITCH DIAMETER | 3.000 INCHES NOMINAL |
| CFFM | SHAFT HARDNESS RATING | 20.3 ROCKWELL C MINIMUM AND 32.2 ROCKWELL C MAXIMUM |
| CFFN | WORM THREAD SECTION LENGTH | 3.500 INCHES NOMINAL |
| CFFP | WORM BODY LENGTH | 3.500 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.344 INCHES NOMINAL FIRST END,FOURTH PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.000 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.000 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.250 INCHES NOMINAL FIRST END,THIRD PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 2.813 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.188 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 3.188 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.250 INCHES NOMINAL FIRST END,FOURTH PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.500 INCHES NOMINAL FIRST END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.500 INCHES NOMINAL SECOND END,THIRD PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.575 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.575 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.000 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 2.000 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | 0.2970 INCHES NOMINAL BOTH ENDS |
| MATL | UNABLE TO DECODE | UNABLE TO DECODE |
| MATT | MATERIAL | STEEL COMP 2315 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 2315 ASSN STD SINGLE MATERIAL RESPONSE |
| ZZZV | FSC APPLICATION DATA | WINCH,TACTICAL VEHICLE |
