Obtain a Quote for United Engine And Machine Co Part Number 4513PFSTD Now

Part Number:  4513PFSTD
NIIN:  00-735-0233
Item Name :  piston internal com
CAGE Code:  91117
INC Code :  16509
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for United Engine And Machine Co part number 4513PFSTD, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on United Engine And Machine Co part number 4513PFSTD for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4513PFSTD

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 4513PFSTD with NSN 2805-00-735-0233, 2805007350233

NSNFSCNIINCLSHazmatDEMILCancelled NSN
2805-00-735-0233

Item PartTypeName:

PISTON,INTERNAL COMBUSTION ENGIN

28050073502330N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
4513PFSTD523

Characteristics Data of NSN 2805-00-735-0233, 2805007350233

MRCCriteriaCharacteristic
AASKHEAD STYLEFLATFLATFLATFLATFLATFLAT
ABKWOVERALL HEIGHT5.938 INCHES NOMINAL5.938 INCHES NOMINAL5.938 INCHES NOMINAL5.938 INCHES NOMINAL5.938 INCHES NOMINAL5.938 INCHES NOMINAL
ABMZDIAMETER4.750 INCHES NOMINAL4.750 INCHES NOMINAL4.750 INCHES NOMINAL4.750 INCHES NOMINAL4.750 INCHES NOMINAL4.750 INCHES NOMINAL
ACXMOIL PASSAGE TYPEHOLE AND HOLE AND HOLE AND HOLE AND HOLE AND HOLE AND SLOT SINGLE RINGSLOT SINGLE RINGSLOT SINGLE RINGSLOTSLOTSLOT
ACXUPINHOLE DIAMETER1.4998 INCHES MINIMUM AND 1.4998 INCHES MINIMUM AND 1.4998 INCHES MINIMUM AND 1.4998 INCHES MINIMUM AND 1.4998 INCHES MINIMUM AND 1.4998 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM1.5000 INCHES MAXIMUM1.5000 INCHES MAXIMUM1.5000 INCHES MAXIMUM
AXFTSKIRT TYPESOLIDSOLIDSOLIDSOLIDSOLIDSOLID
AXFXSKIRT BOTTOM CUTAWAY FEATURENOT INCLUDEDNOT INCLUDEDNOT INCLUDEDNOT INCLUDEDNOT INCLUDEDNOT INCLUDED
AXFZRING GROOVE QUANTITY555555
AXGAUNABLE TO DECODEUNABLE TO DECODE
AXGBRING GROOVE WIDTH0.2500 INCHES MINIMUM AND 0.2500 INCHES MINIMUM AND 0.1880 INCHES MINIMUM AND 0.1880 INCHES MINIMUM AND 0.1880 INCHES MINIMUM AND 0.2500 INCHES MINIMUM AND 0.1890 INCHES MAXIMUM 4TH RING0.1890 INCHES MAXIMUM 4TH RING0.1890 INCHES MAXI
AXGDRING GROOVE DIAMETER4.217 INCHES MINIMUM AND 4.217 INCHES MINIMUM AND 4.227 INCHES MAXIMUM 1ST RING4.227 INCHES MAXIMUM 1ST RING
AXGDRING GROOVE DIAMETER4.257 INCHES MINIMUM AND UNABLE TO DECODEUNABLE TO DECODEUNABLE TO DECODE4.267 INCHES MAXIMUM 4TH RING
AXGERING GROOVE POSITION BELOW PISTON PINNUMBER 1,NUMBER 2,NUMBER 3,NUMBER 4,AND NUMBER 5 ALL RINGS
AXPHOIL GROOVENOT INCLUDED
AXPPPININCLUDED
AXPRRINGNOT INCLUDED
BQBLCARBON GROOVENOT INCLUDED
MATLUNABLE TO DECODEUNABLE TO DECODE
MATTMATERIALALUMINUM
SURFUNABLE TO DECODEUNABLE TO DECODE
WGHTWEIGHT70.250 OUNCES
ZZZVFSC APPLICATION DATAGASOLINE ENGINE,NONAIRCRAFT
AGYESURFACE FINISHFINISHEDFINISHEDFINISHEDFINISHEDFINISHEDFINISHED
AXFRFINISHED SIZE DESIGNATIONSTANDARDSTANDARDSTANDARDSTANDARDSTANDARDSTANDARD
AXGBRING GROOVE WIDTH0.0950 INCHES MINIMUM AND 0.0950 INCHES MINIMUM AND 0.2500 INCHES MINIMUM AND 0.2500 INCHES MINIMUM AND 0.2500 INCHES MINIMUM AND 0.0950 INCHES MINIMUM AND 0.2510 INCHES MAXIMUM 3RD RING0.2510 INCHES MAXIMUM 3RD RING0.2510 INCHES MAXI
AXGBRING GROOVE WIDTH0.0970 INCHES MINIMUM AND 0.0970 INCHES MINIMUM AND 0.0950 INCHES MINIMUM AND 0.0950 INCHES MINIMUM AND 0.0950 INCHES MINIMUM AND 0.0970 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM 2ND RING0.0960 INCHES MAXIMUM 2ND RING0.0960 INCHES MAXI
AXGBRING GROOVE WIDTH0.0970 INCHES MINIMUM AND 0.0970 INCHES MINIMUM AND 0.0970 INCHES MINIMUM AND 0.0980 INCHES MAXIMUM 1ST RING0.0980 INCHES MAXIMUM 1ST RING0.0980 INCHES MAXIMUM 1ST RING
AXGDRING GROOVE DIAMETER4.257 INCHES MINIMUM AND UNABLE TO DECODEUNABLE TO DECODEUNABLE TO DECODE4.267 INCHES MAXIMUM 3RD RING
AXGDRING GROOVE DIAMETERUNABLE TO DECODE4.217 INCHES MINIMUM AND 4.257 INCHES MINIMUM AND UNABLE TO DECODEUNABLE TO DECODE4.227 INCHES MAXIMUM 2ND RING4.267 INCHES MAXIMUM 3RD RING
AXPKDISTANCE FROM PIN HOLE CENTER TO EXTREME TOP3.620 INCHES MINIMUM AND 3.630 INCHES MAXIMUM
AXPLPIN HOLE BUSHINGNOT INCLUDED
AXPNRETAINING RING GROOVEINCLUDED
AXPQPIN TYPE FOR WHICH DESIGNEDFLOATING
SFTTSURFACE TREATMENTTIN

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top