Obtain a Quote for Telemeter Electronic Gmbh Part Number 3575 Now

Part Number:  3575
Manufacturer:  Telemeter Electronic Gmbh
NIIN:  01-162-2565
Item Name :  bracket double angle
CAGE Code:  C2258
INC Code :  20354
Country:  USA
NCB Code:  01

When you would like to secure affordable procurement options for Telemeter Electronic Gmbh part number 3575, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Telemeter Electronic Gmbh part number 3575 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3575

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 3575 with NSN 5340-01-162-2565, 5340011622565

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-01-162-2565

Item PartTypeName:

BRACKET,DOUBLE ANGLE

53400116225650P
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
3575623

Characteristics Data of NSN 5340-01-162-2565, 5340011622565

MRCCriteriaCharacteristic
ADLKFIRST LEG LENGTH0.800 INCHES NOMINAL
ADLLSECOND LEG LENGTH0.800 INCHES NOMINAL
AHLFSECOND LEG WIDTH0.700 INCHES NOMINAL
AHLKFIRST LEG HOLE DIAMETER0.281 INCHES NOMINAL
AHLNSECOND LEG HOLE DIAMETER0.250 INCHES NOMINAL
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.350 INCHES NOMINAL
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.300 INCHES NOMINAL
AHPWFIRST LEG THICKNESS0.063 INCHES NOMINAL
AHPXSECOND LEG THICKNESS0.063 INCHES NOMINAL
AHPZCENTER SECTION HEIGHT1.600 INCHES NOMINAL
AHQACENTER SECTION WIDTH0.700 INCHES NOMINAL
AHQBCENTER SECTION THICKNESS0.063 INCHES NOMINAL
AHQNFIRST LEG WIDTH0.700 INCHES NOMINAL
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.350 INCHES NOMINAL
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.300 INCHES NOMINAL
AJZUFIRST LEG STYLESQUARE
AKAUFIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
AKBUSECOND LEG STYLESQUARE
AKCUSECOND LEG HOLE ARRANGEMENT STYLEONE HOLE
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
CSSQFIRST LEG ANGLE90.0 DEGREES NOMINAL
CSSRSECOND LEG ANGLE90.0 DEGREES NOMINAL
FEATSPECIAL FEATURESINCLUDES 1/4 IN. 28 PRESSNUT
MATTMATERIALSTEEL COMP 316
STYLSTYLE DESIGNATORDOUBLE ANGLE

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top