When you would like to secure affordable procurement options for Ss White Technologies Inc part number FAUSG11DZ1, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Ss White Technologies Inc part number FAUSG11DZ1 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-444-9625 Item PartTypeName: SHAFT ASSEMBLY,FLEXIBLE | 3040 | 004449625 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FAUSG11DZ1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 2B BOTH ENDS |
| AAJF | THREAD DIRECTION | RIGHT-HAND BOTH ENDS |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL BOTH ENDS |
| AAUJ | SPLINE MAJOR DIAMETER | 0.292 INCHES NOMINAL FIRST END |
| ABHP | OVERALL LENGTH | 10.062 INCHES NOMINAL |
| ABSA | SPLINE QUANTITY | 12 FIRST END |
| ABSC | SPLINE MINOR DIAMETER | 0.226 INCHES NOMINAL FIRST END |
| ADMS | WRENCHING FACILITY OUTSIDE DIAMETER | 0.750 INCHES NOMINAL BOTH ENDS |
| AEDN | TIP LENGTH | 0.469 INCHES NOMINAL BOTH ENDS |
| AGJS | PITCH DIAMETER | 0.250 INCHES NOMINAL FIRST END |
| AJXJ | CORE MATERIAL | COPPER |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF BOTH ENDS |
| AKMH | CORE DIAMETER | 0.188 INCHES NOMINAL |
| APJC | THREAD LOCATION | INTERNAL BOTH ENDS |
| APTD | END TYPE | ROUND,INTERNAL SPLINED FIRST END |
| APTD | END TYPE | THREADED MALE SECOND END |
| AWZY | END CONNECTION TYPE | UNION FERRULE BOTH ENDS |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 14.5 FIRST END |
| AXFH | SPLINE LENGTH | 0.437 INCHES NOMINAL FIRST END |
| AXYS | SPLINE TYPE | INVOLUTE FIRST END |
| BDRL | SETSCREW | INCLUDED SECOND END |
| BDRL | SETSCREW | NOT INCLUDED FIRST END |
| BJPS | CASING MATERIAL | NICKEL COPPER ALLOY |
| BPPL | WRENCHING FACILITY TYPE | SERRATED SURFACE BOTH ENDS |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.375 INCHES NOMINAL DIAMETER SECOND END |
| CFQW | CROSS SECTION SIZE AND LOCATION | 0.406 INCHES NOMINAL DIAMETER FIRST END |
| CFRM | TORSIONAL DEFLECTION RATING | 0.2 DEG PER IN.-LB WINDING AND UNWINDING TORSIONAL DEFLECTION |
| CFRN | CASING SURFACE TREATMENT | PASSIVATED |
| CFRP | CASING LENGTH BETWEEN FERRULES | 8.437 INCHES NOMINAL |
| CFRQ | CASING OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| CFRW | END OVERALL DIAMETER | 0.437 INCHES NOMINAL BOTH ENDS |
| CFRY | LUBRICATION FITTING | NOT PROVIDED BOTH ENDS |
| CFRZ | CORE OVERALL LENGTH | 9.594 INCHES NOMINAL |
| CFSB | CORE ROTATION DIRECTION | CLOCKWISE |
| CFSF | CORE TIP THREAD CLASS | 2A SECOND END |
| CFSH | CORE TIP THREAD DIRECTION | RIGHT-HAND SECOND END |
| CFSJ | CORE TIP THREAD LENGTH | 0.469 INCHES NOMINAL SECOND END |
| CFSL | CORE REMOVABILITY | NONREMOVABLE |
| FEAT | SPECIAL FEATURES | 0.126 IN. DIA BORE 0.375 IN. DEEP WITH 0.038 IN. DIA PIN THRU 0.281 IN. FROM END SECOND CORE END |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
