Obtain a Quote for Smiths Tubular Systems Laconia Inc Part Number S39008 0172C Now

Part Number:  S39008 0172C
NIIN:  00-722-2592
CAGE Code:  78570
INC Code :  20311
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Smiths Tubular Systems Laconia Inc part number S39008 0172C, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Smiths Tubular Systems Laconia Inc part number S39008 0172C for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for S39008 0172C

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


Characteristics Data of NSN 4720-00-722-2592, 4720007222592

MRCCriteriaCharacteristic
AAJDThread Class3B 1ST END
CQRBSeat Angle37.0 DEGREES 2ND END
CQRBSeat Angle37.0 DEGREES 1ST END
MRCDecoded RequirementClear Text Reply
CRWLInside Surface ConditionSMOOTH
AAJFThread DirectionRIGHT-HAND 1ST END
ADJSExterior ColorNATURAL
CQGMMaximum Operating Pressure3000.0 POUNDS PER SQUARE INCH
AAJFThread DirectionRIGHT-HAND 2ND END
ZZZKSpecification/Standard DataMIL MIL-H-38360,SIZE 8 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
AKUUEnd Connection DesignELBOW 2ND END
AKUUEnd Connection DesignSTRAIGHT 1ST END
CRJMOuter Covering Environmental ProtectionCORROSION RESISTANT
AAJDThread Class3B 2ND END
CRDWHydrostatic Test Pressure6000.0 POUNDS PER SQUARE INCH
CRXXMeasuring Method And Length17.250 INCHES NOMINAL WORKING
CRFYFlow Angle45.0 DEGREES 2ND END
AKXLEnd Fitting Component And MaterialCOMPLETE FITTING STEEL ALL ENDS
THSDThread Series DesignatorUNF 2ND END
AKXMFitting Component And Surface TreatmentCOMPLETE FITTING PASSIVATE 1ST END
CBBLFeatures ProvidedELECTROSTATIC DISCHARGE CAPABILITY
CQBDBurst Test Pressure14000.0 POUNDS PER SQUARE INCH
THSDThread Series DesignatorUNF 1ST END
AAGRCross-Sectional Shape StyleROUND
ABKVOutside Diameter0.765 INCHES MAXIMUM
CQJXNominal Thread Size0.750 INCHES 1ST END
AARXInside Diameter0.391 INCHES MINIMUM
FEATSpecial FeaturesEXTERNAL PROTECTION TYPE AND LOCATION- BOTH ENDS CHAFE GUARD,POLYVINYL CHLORIDE ACETATE, INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE
AWLSConnection TypeTHREADED INTERNAL TUBE 1ST END
ACKHMinimum Inside Bending Radius5.750 INCHES
AWLSConnection TypeTHREADED INTERNAL TUBE 2ND END
AHNCConnection StyleSWIVEL NUT FLARE 1ST END
CQJXNominal Thread Size0.750 INCHES 2ND END
AHNCConnection StyleSWIVEL NUT FLARE 2ND END
CQCSLayer Composition And LocationOUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE
ABJHTemp Rating-65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top