Obtain a Quote for Servo Instrument Corporation Part Number 08W1-2848 Now

Part Number:  08W1-2848
Alternate P/N:  08W12848
NIIN:  00-854-3007
Item Name :  resistor variable w
CAGE Code:  19176
INC Code :  37408
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Servo Instrument Corporation part number 08W1-2848, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Servo Instrument Corporation part number 08W1-2848 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 08W1-2848

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 08W1-2848 with NSN 5905-00-854-3007, 5905008543007

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-854-3007

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050085430070NB
CIICHCCESDPMICCriticalityENAC
UBA
Part NumberISCRNVCRNCCHCCMSDSSADC
900217-33C23

Characteristics Data of NSN 5905-00-854-3007, 5905008543007

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER0.4372 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM
ABPCUNDERCUT WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABPMBODY DIAMETER0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
ABXFSHAFT LENGTH0.500 INCHES NOMINAL
ADAQBODY LENGTH0.705 INCHES MINIMUM AND 0.710 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION320.0 NOMINAL
AEFMMAXIMUM STOP TORQUE80.00 INCH-OUNCES
APXHTERMINAL LOCATIONREAR END
AXGYMOUNTING METHODCLAMP RING
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
CQCCELECTRICAL RESISTANCE PER SECTION1.0 KILOHMS SINGLE SECTION
CQCHTAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION325.0 SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG330.0 NOMINAL
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER125.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY2 TAB,SOLDER LUG AND 1 TURRET
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AAVMPILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER0.432 INCHES MINIMUM AND 0.437 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE0.20 INCH-OUNCES
AEFLMAXIMUM RUNNING TORQUE0.20 INCH-OUNCES
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION0.50 TO 0.50 SINGLE SECTION
CRJSFIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT5.0/5.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSCYTEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS20.0/20.0 SINGLE SECTION

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top