When you would like to secure affordable procurement options for Servo Instrument Corporation part number 28W8-2046, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Servo Instrument Corporation part number 28W8-2046 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-755-0828 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 007550828 | N | A | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ST18-S180A | C | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 5 |
| AAVM | PILOT LENGTH | 0.1250 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ADAQ | BODY LENGTH | 4.219 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEEA | SWITCH TYPE | ROTARY |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 6.50 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 4.00 INCH-OUNCES |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE,SINGLE THROW,NORMALLY OPEN,BOTH POSITIONS MAINTAINED |
| AJYN | SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 0.30 TO 0.30 ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS TERMINAL BASE LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION AND 1 2ND SECTION AND 1 3RD SECTION AND 1 4TH SECTION AND 1 5TH SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | 3 SWITCH SECTIONS |
| TTQY | TERMINAL TYPE AND QUANTITY | 26 TAB,SOLDER LUG |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.4950 INCHES MINIMUM AND 0.5050 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.344 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 1.750 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.755 INCHES MAXIMUM |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.002 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.0620 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 35.0 AND 250.0 |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGH | SWITCH OPERATING POSITION | START OF LINEAR MOVEMENT |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| CBBL | FEATURES PROVIDED | SWITCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS 1ST SECTION AND 80.000 KILOHMS 2ND SECTION AND 80.000 KILOHMS 3RD SECTION AND 4.000 KILOHMS 4TH SECTION AND 4.000 KILOHMS 5TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 175.0 ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | 20.0 TO 20.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 5.0 TO 5.0 ALL SECTIONS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 25000.0 1ST SECTION AND 40000.0 2ND SECTION AND 40000.0 3RD SECTION AND 2000.0 4TH SECTION AND 2000.0 5TH SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 0.500 DC AND 0.001 DC AND 0.010 DC |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
