When you would like to secure affordable procurement options for Sensor Systems Inc part number 61166, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Sensor Systems Inc part number 61166 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-936-4276 Item PartTypeName: RESISTOR,VARIABLE,NONWIRE WOUND | 5905 | 009364276 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 300FTS110 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | CYLINDRICAL HOLE/SLOT MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 5.594 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.375 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| ABNC | FLAT HEIGHT | 0.212 INCHES MINIMUM AND 0.217 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 3.000 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.244 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 1.594 INCHES MINIMUM AND 1.656 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.469 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.750 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,FLATTED |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 357.0 MINIMUM |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.003 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.10000 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.003 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 28.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 20.0 KILOHMS ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 0.10/0.10 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | 200.0 TO 200.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 10.0/10.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | SHAFTS OPERATE INDEPENDENTLY OF ONE ANOTHER |
| TEST | TEST DATA DOCUMENT | 18876-10179166 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
