Obtain a Quote for Sae International Part Number 8212766 Now

Part Number:  8212766
Manufacturer:  Sae International
NIIN:  00-822-5451
Item Name :  synchro receiver
CAGE Code:  0U583
INC Code :  02072
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Sae International part number 8212766, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Sae International part number 8212766 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 8212766

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 8212766 with NSN 5990-00-822-5451, 5990008225451

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5990-00-822-5451

Item PartTypeName:

SYNCHRO,RECEIVER

59900082254510N
CIICHCCESDPMICCriticalityENAC
7U
Part NumberISCRNVCRNCCHCCMSDSSADC
MILS20708-94295

Characteristics Data of NSN 5990-00-822-5451, 5990008225451

MRCCriteriaCharacteristic
AAVLPILOT DIAMETER0.5990 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM
AAZXSECOND SHOULDER LENGTH0.1680 INCHES MINIMUM AND 0.1700 INCHES MAXIMUM
ABHPOVERALL LENGTH4.2940 INCHES MAXIMUM
ABKKFLANGE DIAMETER2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM
AJSVROTOR INPUT ELECTRICAL POWER RATING7.8 WATTS NOMINAL
AJSWZRO RESISTANCE IN OHMS9.10 NOMINAL
AJVGMAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT75.00 OUTPUT
AJVMSPLINE TOOTH QUANTITY22 SINGLE SHAFT
AJVNRECEIVER ERROR ANGULAR RANGE IN MINUTES60.0 TO 60.0
AJVVTORQUE GRADIENT PER ANGULAR DEG0.130 INCH-OUNCES NOMINAL
AJVWALIGNMENT HOLE QUANTITY3
AJWVAFT OF FIRST FLANGE DIAMETER1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM
AJXASPLINE TOOTH DIAMETRAL PITCH96 SINGLE SHAFT
AJYYSHAFT THREAD SERIES DESIGNATORUNF SINGLE SHAFT
AKANSHAFT THREAD CLASS2A SINGLE SHAFT
CQRGBODY MATERIALSTEEL CORROSION RESISTING
CQTMTERMINAL LOCATIONREAR
CQWQSHAFT THREAD LENGTH0.2660 INCHES NOMINAL SINGLE SHAFT
CRSJSHAFT TYPESPLINE W/THREADS SINGLE SHAFT
CTDWPLUS J ZSO-90 REACTANCE IN OHMS6.16 NOMINAL
CWBHSHAFT NOMINAL THREAD SIZE0.250 INCHES SINGLE SHAFT
FEATSPECIAL FEATURESDEGAUSSING EQUIPMENT
TTQYTERMINAL TYPE AND QUANTITY6 SCREW
AAQLBODY STYLESTANDARD ROUND D
AAVHSHOULDER DIAMETER1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
AAZWSECOND SHOULDER DIAMETER1.9985 INCHES MINIMUM AND 1.9995 INCHES MAXIMUM
ABKUFLANGE THICKNESS0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
ABPMBODY DIAMETER1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.2500 INCHES NOMINAL SINGLE SHAFT
ABXFSHAFT LENGTH0.6930 INCHES MINIMUM AND 0.7190 INCHES MAXIMUM SINGLE SHAFT
AHCGMAXIMUM TEMP RISE65.0 DEG CELSIUS
AJSLBODY SIZE23
AJSRROTOR INPUT VOLTAGE RATING IN VOLTS115.0 NOMINAL
AJSSFREQUENCY IN HERTZ400.0 NOMINAL
AJSTROTOR INPUT CURRENT RATING945.0 MILLIAMPERES NOMINAL
AJSYZSO RESISTANCE IN OHMS8.20 NOMINAL
AJTAZRS RESISTANCE IN OHMS12.00 NOMINAL
AJTEZSO-90 RESISTANCE IN OHMS6.16 NOMINAL
AJVHMAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT100.00
AJWQPILOT LENGTH0.0360 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM
AJWRSHOULDER LENGTH0.2500 INCHES NOMINAL
AJWXMOUNTING SURFACE TO TERMINAL END DISTANCE3.4450 INCHES MAXIMUM
AKAFSHAFT THREAD DIRECTIONRIGHT-HAND SINGLE SHAFT
CQXQPLUS J ZRO REACTANCE IN OHMS119.00 NOMINAL
CRGZPLUS J ZSO REACTANCE IN OHMS61.50 NOMINAL
CRKLPLUS J ZRS REACTANCE IN OHMS9.62 NOMINAL
CRSYALIGNMENT HOLE DEPTH0.1250 INCHES NOMINAL
CRTLCRITICALITY CODE JUSTIFICATIONFEAT
CSJYTRANSFORMATION RATIO0.783 ROTOR TO STATOR NOMINAL
CTCWALIGNMENT HOLE BOLT CIRCLE DIAMETER1.6420 INCHES NOMINAL
TESTTEST DATA DOCUMENT81349-MIL-S-20708 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-S-20708/94 GOVERNMENT SPECIFICATION
ZZZTNONDEFINITIVE SPEC/STD DATA23TRA4A TYPE

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top