Obtain a Quote for Northrop Grumman Systems Corporation Part Number CRD160-31 Now

Part Number:  CRD160-31
Alternate P/N:  CRD16031
NIIN:  00-867-9135
Item Name :  motor alternating c
CAGE Code:  26916
INC Code :  00530
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Northrop Grumman Systems Corporation part number CRD160-31, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Northrop Grumman Systems Corporation part number CRD160-31 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CRD160-31

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number CRD160-31 with NSN 6105-00-867-9135, 6105008679135

NSNFSCNIINCLSHazmatDEMILCancelled NSN
6105-00-867-9135

Item PartTypeName:

MOTOR,ALTERNATING CURRENT

61050086791350N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
CRD160-31295

Characteristics Data of NSN 6105-00-867-9135, 6105008679135

MRCCriteriaCharacteristic
AAJTOVERALL HEIGHT3.351 INCHES
AAJUOVERALL LENGTH4.391 INCHES
AAJVOVERALL WIDTH3.351 INCHES
ABWVSHAFT DIAMETER0.312 INCHES MINIMUM SINGLE END AND 0.313 INCHES MAXIMUM SINGLE END
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE SINGLE END
AKPSDUTY CYCLECONTINUOUS
ANPZINCLOSURE FEATURETOTALLY INCLOSED
AXCPWINDING TYPEINDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE
AXGYMOUNTING METHODFIXED BASE AND FACE
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 THREADED HOLE
BFMFCOOLING METHODAMBIENT AIR
BKPBCURRENT RATING METHODLOAD
BKPHTORQUE RATING AND TYPE6.0 INCH-OUNCES STARTING
BKPQINCLOSURE SPECIFICATIONCOMMERCIAL
CBBLFEATURES PROVIDEDHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
CNXSPOWER RATING0.0666 HORSEPOWER OUTPUT
CWCSLENGTH OF SHAFT FROM HOUSING0.626 INCHES SINGLE END
CWDMSHAFT CENTER TO MOUNTING SURFACE DISTANCE1.750 INCHES SINGLE END
CWDTNOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH0.812 INCHES
CWFQMOUNTING FACILITY CIRCLE DIAMETER2.937 INCHES
CWFXROTOR SPEED RATING IN RPM3350.0 SINGLE FULL LOAD
CWFYNOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH1.375 INCHES
CWGLCURRENT RATING IN AMPS0.400 SINGLE INPUT
CWGQCONNECTION TYPE AND VOLTAGE RATING IN VOLTS115.0 LINE TO NEUTRAL SINGLE INPUT
CWHZSHAFT END CHARACTERISTICA1 SINGLE STYLE SINGLE END
FAAZPHASESINGLE INPUT
FREQFREQUENCY IN HERTZ50.0 INPUT OR 60.0 INPUT
TTQYTERMINAL TYPE AND QUANTITY3 WIRE LEAD

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top