Obtain a Quote for Napco International Llc Part Number 1B7095 Now

Part Number:  1B7095
Manufacturer:  Napco International Llc
NIIN:  00-033-5588
Item Name :  regulator engine ge
CAGE Code:  95201
INC Code :  17169
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Napco International Llc part number 1B7095, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Napco International Llc part number 1B7095 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1B7095

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 1B7095 with NSN 2920-00-033-5588, 2920000335588

NSNFSCNIINCLSHazmatDEMILCancelled NSN
2920-00-033-5588

Item PartTypeName:

REGULATOR,ENGINE GENERATOR

2920000335588N
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
DX5643593

Characteristics Data of NSN 2920-00-033-5588, 2920000335588

MRCCriteriaCharacteristic
AARATERMINAL QUANTITY3
AARBTERMINAL TYPESCREW
ABTBMOUNTING HOLE DIAMETER0.344 INCHES NOMINAL
ABTDMOUNTING SLOT WIDTH0.344 INCHES NOMINAL
ABVGMOUNTING SLOT LENGTH0.438 INCHES NOMINAL
ADERMOUNTING STYLETWO PLAIN HOLES TWO SLOTTED HOLES
ADNYDISTANCE BETWEEN HOLES ALONG LENGTH6.000 INCHES NOMINAL
AGBCSHOCK MOUNTNOT PROVIDED
ALBHRADIO INTERFERENCE SHIELDINGNOT PROVIDED
ANPPOUTPUT VOLTAGE RATING IN VOLTS6.0 MINIMUM AND 7.3 MAXIMUM
ANYCSYSTEM VOLTAGE RATING6.0
ANYDSYSTEM GROUND POLARITYPOSITIVE
ANYEVOLTAGE REGULATOR UNIT TYPEWIRE WOUND COIL
ANYHVOLTAGE REGULATOR UNIT QUANTITY1
ANYJCURRENT REGULATOR UNIT TYPEWIRE WOUND COIL
ANYKCURRENT REGULATOR UNIT QUANTITY1
ANYPOUTPUT CURRENT RATING IN AMPS24.0 MINIMUM AND 26.0 MAXIMUM
ANYRCIRCUIT CONTROL DEVICE TYPECUTOUT RELAY
ANYSCUT-IN VOLTAGE RATING7.0 MAXIMUM AND 6.5 MINIMUM
ANYZCUTOUT CURRENT RATING IN AMPS0.5 MINIMUM AND 6.0 MAXIMUM
ANZBREVERSE CURRENT OVERLOAD CIRCUIT BREAKERNOT INCLUDED
ANZCFIELD RELAY UNITNOT INCLUDED
ANZETERMINAL ENCASEMENTNOT ENCASED
APATCENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES ALONG LENGTH6.000 INCHES NOMINAL
APAWCENTER TO CENTER DISTANCE BETWEEN SLOTTED HOLES AND PLAIN HOLES ALONG WIDTH5.188 INCHES NOMINAL

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top