When you would like to secure affordable procurement options for L3 Technologies Inc part number 8682691, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on L3 Technologies Inc part number 8682691 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-00-678-4238 Item PartTypeName: GEAR,SPUR | 3020 | 006784238 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3020-00-678-4238 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED,OFFSET,SOLID |
| ABSX | ATTACHMENT METHOD | MOUNTING HOLE |
| AGJS | PITCH DIAMETER | 5.5000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 33 |
| ANTP | BORE STYLE | TAPERED W/KEYWAY BOTH ENDS |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNF AXIALLY THROUGH BODY,FIRST END |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 24 AXIALLY THROUGH BODY,FIRST END |
| CQFM | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 52.0 ROCKWELL C MAXIMUM OVERALL |
| CQLT | MOUNTING HOLE NOMINAL THREAD SIZE | 0.312 INCHES TRANSVERSELY THROUGH FACE |
| CTQY | MOUNTING HOLE TYPE AND QUANTITY | 3 THREADED AXIALLY THROUGH BODY,FIRST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | 5.747 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.910 INCHES |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.250 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 1.030 INCHES FIRST END |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.630 INCHES SECOND END |
| CWRM | FACE NOMINAL WIDTH | 0.880 INCHES |
| CWSN | KEYWAY NOMINAL WIDTH | 0.252 INCHES BOTH ENDS |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.550 INCHES FIRST END |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.679 INCHES SECOND END |
| CWSW | TAPER MAJOR NOMINAL DIAMETER | 1.358 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 1.910 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.090 INCHES SECOND END |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 3.120 INCHES AXIALLY THROUGH BODY,FIRST END |
| MATT | MATERIAL | STEEL OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | ONE PROTRUDING HUB,ONE RECESSED HUB |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
