Obtain a Quote for Goodyear Tire And Rubber Company The Part Number 20SW-20SF90-47-1-2 Now

Part Number:  20SW-20SF90-47-1-2
Alternate P/N:  20SW20SF904712
NIIN:  00-789-6556
Item Name :  hose assembly nonme
CAGE Code:  73842
INC Code :  20311
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Goodyear Tire And Rubber Company The part number 20SW-20SF90-47-1-2, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Goodyear Tire And Rubber Company The part number 20SW-20SF90-47-1-2 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 20SW-20SF90-47-1-2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 20SW-20SF90-47-1-2 with NSN 4720-00-789-6556, 4720007896556

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4720-00-789-6556

Item PartTypeName:

HOSE ASSEMBLY,NONMETALLIC

4720007896556N
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
U2EL20-20PA900PEN47-1/2295

Characteristics Data of NSN 4720-00-789-6556, 4720007896556

MRCCriteriaCharacteristic
ABJHTEMP RATING40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE
ABKVOUTSIDE DIAMETER1.797 INCHES NOMINAL
ACKHMINIMUM INSIDE BENDING RADIUS8.000 INCHES
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.312 INCHES NOMINAL 1ST END
AECSBOLT HOLE QUANTITY4 1ST END
AGFFFLANGE WIDTH2.782 INCHES NOMINAL 1ST END
AHNXBOLT HOLE DIAMETER0.469 INCHES NOMINAL 1ST END
AKUUEND CONNECTION DESIGNELBOW 1ST END
AWLSCONNECTION TYPEPLAIN FACE FLANGE 1ST END
CQBDBURST TEST PRESSURE800.0 POUNDS PER SQUARE INCH
CQCSLAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER HELIX WIRE COIL AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER,SYNTHETIC
CQGMMAXIMUM OPERATING PRESSURE200.0 POUNDS PER SQUARE INCH
CRDWHYDROSTATIC TEST PRESSURE400.0 POUNDS PER SQUARE INCH
CRFYFLOW ANGLE90.0 DEGREES 1ST END
CRJMOUTER COVERING ENVIRONMENTAL PROTECTIONOIL RESISTANT AND WEATHERPROOF
CRSMVACUUM IN TORR50.8
CRXXMEASURING METHOD AND LENGTH47.500 INCHES NOMINAL OVERALL
AAGRCROSS-SECTIONAL SHAPE STYLEROUND
AARXINSIDE DIAMETER1.250 INCHES NOMINAL
ABKUFLANGE THICKNESS0.574 INCHES NOMINAL 1ST END
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.094 INCHES NOMINAL 1ST END
AFQNFLANGE LENGTH3.125 INCHES NOMINAL 1ST END
AHNCCONNECTION STYLEPLAIN W/ GASKET GROOVE SAE FLANGED HEAD 1ST END
AKUTEND FLANGE CONSTRUCTIONSOLID 1ST END
CRWLINSIDE SURFACE CONDITIONSMOOTH
CTCJFLANGE STYLEDOUBLE OVAL SAE SPLIT TYPE FLANGE 1ST END
FEATSPECIAL FEATURESPERMANENT END FITTINGS
MEDAMEDIA FOR WHICH DESIGNEDAIR AND FUEL/OIL,HYDROCARBON AND WATER SINGLE RESPONSE

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top