When you would like to secure affordable procurement options for General Motors Corp part number Q30206A33MN01, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on General Motors Corp part number Q30206A33MN01 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-158-5917 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 001585917 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| B31706 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.5906 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.2992 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.4409 INCHES NOMINAL |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGVT | OUTER RING WIDTH | 0.3750 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.3750 INCHES NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTHY | CONTACT ANGLE | 25.0 DEGREES MINIMUM |
| FEAT | SPECIAL FEATURES | FACE OF INNER RING LAPPED; 1/32 IN. GROOVE IN OD OF OUTER RING |
| LBMA | LUBRICATION MATERIAL | LUBRICANT |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote