Obtain a Quote for General Dynamics Global Imaging Part Number 20871 Now

Part Number:  20871
NIIN:  00-836-6081
Item Name :  resistor variable w
CAGE Code:  10112
INC Code :  37408
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for General Dynamics Global Imaging part number 20871, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on General Dynamics Global Imaging part number 20871 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 20871

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 20871 with NSN 5905-00-836-6081, 5905008366081

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-836-6081

Item PartTypeName:

RESISTOR,VARIABLE,WIRE WOUND,PRE

59050083660810N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
20871C25

Characteristics Data of NSN 5905-00-836-6081, 5905008366081

MRCCriteriaCharacteristic
ABVJANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG120.0
ABWVSHAFT DIAMETER0.125 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0600 INCHES NOMINAL
AEDXSHAFT STYLEROUND,SLOTTED
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION350.0 NOMINAL
AEFZSHAFT RUNOUT0.002 INCHES
AJYPSCREW THREAD SERIES DESIGNATORUNC
AJYQSCREW THREAD QUANTITY PER INCH56.0
AXGYMOUNTING METHODTHREADED HOLE
CQCCELECTRICAL RESISTANCE PER SECTION2.5 KILOHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG360.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION1.00 TO 1.00 SINGLE SECTION
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRJSFIXED TAP QUANTITY PER SECTION1 SINGLE SECTION
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
ABPAUNDERCUT DIAMETER1.030 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0550 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM
ABPMBODY DIAMETER1.093 INCHES NOMINAL
AAPNSECTION QUANTITY1
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVLPILOT DIAMETER1.0300 INCHES NOMINAL
AAVMPILOT LENGTH0.0400 INCHES NOMINAL
ABHPOVERALL LENGTH1.078 INCHES NOMINAL
ABUFANGLE OF MOUNTING HOLE IN DEG120.0
ABXFSHAFT LENGTH0.438 INCHES NOMINAL
ADAQBODY LENGTH0.600 INCHES MAXIMUM
AECZMOUNTING LIP DIAMETER1.0930 INCHES NOMINAL
AEDEMOUNTING HOLE/STUD CIRCLE DIAMETER0.812 INCHES NOMINAL
AEFDACTUATOR TYPESINGLE SHAFT
AEFKMAXIMUM STARTING TORQUE0.20 INCH-OUNCES
AJYNSCREW THREAD DIAMETER0.086 INCHES NOMINAL
AKPVMOUNTING FACILITY QUANTITY3
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
CRKSTAP LOCATION TOLERANCE PER SECTION1.0/1.0 OHMS SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT10.0 TO 10.0 SINGLE SECTION
CRSXACTUATOR TRAVEL CONTROL FEATURECONTINUOUS MOTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER40.0 SINGLE SECTION
TTQYTERMINAL TYPE AND QUANTITY4 TURRET

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top