When you would like to secure affordable procurement options for Gates Corp part number 4M2T-6FFORX-4FFORX90S-157, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Gates Corp part number 4M2T-6FFORX-4FFORX90S-157 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-436-3263 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014363263 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 5043 | 2 | 1 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 2B 2ND END |
| THSD | Thread Series Designator | UN 1ST END |
| MRC | Decoded Requirement | Clear Text Reply |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| CRWL | Inside Surface Condition | SMOOTH |
| AAJD | Thread Class | 2B 1ST END |
| ADJS | Exterior Color | BLACK |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| CQGM | Maximum Operating Pressure | 3000.0 POUNDS PER SQUARE INCH |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| CRDW | Hydrostatic Test Pressure | 6000.0 POUNDS PER SQUARE INCH |
| CRFY | Flow Angle | 90.0 DEGREES 2ND END |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| CQBD | Burst Test Pressure | 12000.0 POUNDS PER SQUARE INCH |
| AAGR | Cross-Sectional Shape Style | ROUND |
| ABKV | Outside Diameter | 0.530 INCHES NOMINAL |
| CQJX | Nominal Thread Size | 0.688 INCHES 1ST END |
| MEDA | Media For Which Designed | AIR AND WATER AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AARX | Inside Diameter | 0.250 INCHES NOMINAL |
| CRJM | Outer Covering Environmental Protection | ABRASION RESISTANT |
| ACKH | Minimum Inside Bending Radius | 2.000 INCHES |
| CRXX | Measuring Method And Length | 157.000 INCHES NOMINAL WORKING |
| AWLS | Connection Type | THREADED INTERNAL TUBE 2ND END |
| CQJX | Nominal Thread Size | 0.562 INCHES 2ND END |
| CMLP | Thread Quantity Per Inch | 18 2ND END |
| AHNC | Connection Style | SWIVEL NUT, GASKET SEAL 2ND END |
| AGAV | End Item Identification | 1740-01-258-3231;SUPPORT EQUIPMENT, C-17A AIRCRAFT |
| AHNC | Connection Style | SWIVEL NUT, GASKET SEAL 1ST END |
| THSD | Thread Series Designator | UN 2ND END |
| CMLP | Thread Quantity Per Inch | 16 1ST END |
| ABJH | Temp Rating | -50.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS | Layer Composition And Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER WOVEN POLYAMIDE CORD |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
