When you would like to secure affordable procurement options for Faber Enterprises Inc part number MS21938-6H, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Faber Enterprises Inc part number MS21938-6H for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4730-00-203-9749 Item PartTypeName: BOLT,FLUID PASSAGE | 4730 | 002039749 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| ER01226 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | BODY WRENCHING |
| AAWX | CONCENTRIC HOLE DEPTH | 1.913 INCHES NOMINAL |
| AAXC | CONCENTRIC HOLE DIAMETER | 0.297 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.594 INCHES NOMINAL |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACKN | FIRST END STYLE DESIGNATOR | PLAIN |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| ACLT | SECOND END STYLE DESIGNATOR | FLARELESS |
| ACMR | SECOND END THREAD CLASS | 3A |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | 0.871 INCHES MINIMUM AND 0.878 INCHES MAXIMUM |
| ATKZ | FIRST END THREAD LENGTH | 0.302 INCHES NOMINAL |
| ATLF | SECOND END THREAD LENGTH | 0.469 INCHES NOMINAL |
| BBDF | WRENCHING FEATURE STYLE | HEXAGON |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.738 INCHES NOMINAL |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | 0.811 INCHES NOMINAL |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | 0.740 INCHES NOMINAL |
| BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | 0.811 INCHES NOMINAL |
| BBKQ | FIFTH DIAMETER FROM WRENCHING FEATURE | 0.480 INCHES NOMINAL |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.052 INCHES NOMINAL |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 0.377 INCHES NOMINAL |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | 0.826 INCHES NOMINAL |
| BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | 1.209 INCHES NOMINAL |
| BBKX | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIFTH DIAMETER | 1.386 INCHES NOMINAL |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.300 INCHES NOMINAL |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.054 INCHES NOMINAL |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 1.688 INCHES NOMINAL |
| BBLF | WRENCHING FEATURE HEIGHT | 0.871 INCHES MINIMUM AND 0.878 INCHES MAXIMUM |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNJF |
| CQYM | FIRST END NOMINAL THREAD SIZE | 0.562 INCHES |
| CRCN | SECOND END SEAT ANGLE | 12.0 DEGREES NOMINAL |
| CRNB | SECOND END NOMINAL THREAD SIZE | 0.562 INCHES |
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | ALUMINUM |
| SFTT | SURFACE TREATMENT | ANODIZE |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
