When you would like to secure affordable procurement options for Edo Corp part number 58283-11, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Edo Corp part number 58283-11 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-491-0923 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 004910923 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3010606C-4-4-4-16 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 2B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| ABJH | TEMP RATING | 40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.690 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| ADJM | UNABLE TO DECODE | UNABLE TO DECODE |
| ADLF | UNABLE TO DECODE | UNABLE TO DECODE |
| ADLG | UNABLE TO DECODE | UNABLE TO DECODE |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING NICKEL ALLOY 400 ALL ENDS |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CQBB | UNABLE TO DECODE | UNABLE TO DECODE |
| CQBD | BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| CQBG | UNABLE TO DECODE | UNABLE TO DECODE |
| CQCS | LAYER COMPOSITION AND LOCATION | |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE 2ND LAYER BRAIDED WIRE 2ND LAYER BRAIDED WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE 2ND LAYER BRAIDED WIRE 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC OUTER LAYER MOLDED RUBBER,SYNTHETIC 3RD LAYER BRAIDED WIRE OUTER LAYER MOLDED RUBBER,SYNTHETIC 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED WIRE AND 1ST LAYER BRAIDED WIRE 1ST LAYER BRAIDED WIRE 2ND LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC OR 1ST LAYER SPIRALLY WRAPPED STEEL FABRIC AND 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC AND 3RD LAY |
| CQGM | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 16.000 INCHES NOMINAL OVERALL |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON AND WATER,FRESH AND WATER,SALT SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | A TYPE AND 1 CLASS |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
