You have reached the Request for Quote (RFQ) page for part number 900C353-9, an item sourced from Clarostat Sensors And Controls (CAGE Code 12697) that is classified with the item name Resistor Variable W. Here, you can utilize our online form to quickly secure tailored pricing and procurement options from our staff as the first step of procurement. With responses always being quick, be sure to get started as soon as possible if you would like to learn more about this part number.
Important Details for Part Number 900C353-9
The part number 900C353-9 is associated with Clarostat Sensors And Controls, identified by the CAGE Code 12697, and is typically referenced under the item name Resistor Variable W. It is categorized under the NSN 5905-01-320-6895, with the NIIN 013206895, INC 37406, and NCB code 01 (USA). Additionally, this part falls under the Federal Supply Group (FSG) 59 and Federal Supply Class (FSC) 5905 Resistors. For more information, these classifications provide further context about the component.
With the form provided, be sure to present our staff with key details on your needs, such as your target pricing, required quantity, and expected turnaround time. Once we receive and review your request for part 900C353-9, a member of our staff will contact you in 15 minutes or less to present customized solutions for your comparisons. Once you make a purchase with us, you can expect our staff to work closely with you through each step of fulfillment to ensure that all needs are met with care and efficiency.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-320-6895 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,NON | 5905 | 013206895 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| L04247 | C | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 2 |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFP | NONTURN DEVICE RADIUS | 0.531 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | 2.125 INCHES MAXIMUM |
| AEFN | NONTURN DEVICE LOCATION | AT 6 OCLOCK AND AT 9 OCLOCK |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND THREADED STUD |
| CBME | CUBIC MEASURE | 6.379 CUBIC INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB,SOLDER LUG |
| ABPM | BODY DIAMETER | 1.719 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.500 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | COMPONENT/EQU |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.5 KILOHMS ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | 20.0 TO 20.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 5.0 TO 5.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 280.0 NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L04247; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVE
Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
