Obtain a Quote for Caterpillar Inc Part Number 4M9102 Now

Part Number:  4M9102
Manufacturer:  Caterpillar Inc
NIIN:  00-477-3440
Item Name :  generator engine ac
CAGE Code:  11083
INC Code :  17311
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Caterpillar Inc part number 4M9102, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Caterpillar Inc part number 4M9102 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4M9102

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 4M9102 with NSN 2920-00-477-3440, 2920004773440

NSNFSCNIINCLSHazmatDEMILCancelled NSN
2920-00-477-3440

Item PartTypeName:

GENERATOR,ENGINE ACCESSORY

2920004773440N
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
IPD4M9102595

Characteristics Data of NSN 2920-00-477-3440, 2920004773440

MRCCriteriaCharacteristic
AAJFTHREAD DIRECTIONRIGHT-HAND
AASATHREAD LENGTH0.730 INCHES MINIMUM AND 0.790 INCHES MAXIMUM
ABFFFURNISHED ITEMSCOOLING FAN AND WOODRUFF KEY
ABPTSECOND STEP DIAMETER0.874 NOMINAL INCHES
ABRRKEYWAY WIDTH0.156 INCHES NOMINAL
ABVAUNTHREADED PORTION LENGTH1.320 INCHES NOMINAL
ACJCMOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
ADERMOUNTING STYLEBRACKET MTD W/THREE MTG HOLES,TOP HOLE THREADED
AFYSKEYWAY LENGTH0.750 INCHES NOMINAL
AHZVSUBMERSIBILITYNONSUBMERSIBLE
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE
ANTXDISTANCE FROM END TO KEYWAY CENTER1.325 INCHES NOMINAL
AWDPTHREAD DIAMETER0.625 INCHES NOMINAL
AXHXGROUND POLARITY TYPENEGATIVE OR POSITIVE
BCGDARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT1720
BCGFMAXIMUM OUTPUT CURRENT RATING IN AMPS20.0
BCGNGROUNDING METHODEXTERNAL
BCGSSHAFT DRIVE END STYLESTRAIGHT SHAFT END,THREADED,W/KEYWAY
BCLYDISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.875 INCHES NOMINAL
BCLZDISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.880 INCHES NOMINAL
BCMBANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG193.0
BCMCANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG159.0
BCMDDISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET9.020 INCHES MINIMUM AND 9.042 INCHES MAXIMUM
BCMFDISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET10.120 INCHES MINIMUM AND 10.182 INCHES MAXIMUM
BCMHBOTTOM MOUNTING HOLE DIAMETER0.514 INCHES MINIMUM AND 0.524 INCHES MAXIMUM
BZRRTHREAD SERIESUNF
CFHLTHREAD CLASS2A
CMLKMOUNTING HOLE THREAD SERIES DESIGNATORUNC
CMLLMOUNTING HOLE THREAD DIAMETER0.375 INCHES NOMINAL
CMLMMOUNTING HOLE THREAD QUANTITY PER INCH16
CMLNMOUNTING HOLE THREAD CLASS2B
CMLPTHREAD QUANTITY PER INCH18
ELECVOLTAGE IN VOLTS24.0

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top