Obtain a Quote for Abb T And D Power Co Inc Part Number 2351-10523-01 Now

Part Number:  2351-10523-01
Alternate P/N:  23511052301
Manufacturer:  Abb T And D Power Co Inc
NIIN:  01-434-8192
Item Name :  gear antibacklash s
CAGE Code:  5Z509
INC Code :  26668
Country:  USA
NCB Code:  01

When you would like to secure affordable procurement options for Abb T And D Power Co Inc part number 2351-10523-01, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Abb T And D Power Co Inc part number 2351-10523-01 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 2351-10523-01

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 2351-10523-01 with NSN 3020-01-434-8192, 3020014348192

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3020-01-434-8192

Item PartTypeName:

GEAR,ANTIBACKLASH,SPUR

30200143481920N
CIICHCCESDPMICCriticalityENAC
UA
Part NumberISCRNVCRNCCHCCMSDSSADC
2351-10523-01595

Characteristics Data of NSN 3020-01-434-8192, 3020014348192

MRCCriteriaCharacteristic
AGAVEND ITEM IDENTIFICATIONJOINT STARS PROGRAM
SFTTSURFACE TREATMENTPASSIVATE RETAINING RING
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC 2ND TREATMENT RESPONSE RETAINING RING
AJLATEETH QUANTITY288
CWPPPRESSURE ANGLE20.0000 DEGREES
ANTPBORE STYLEPLAIN BOTH ENDS
CWRMFACE NOMINAL WIDTH0.1650 INCHES
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643N ASSN STD 1ST MATERIAL RESPONSE FIRST GEAR AMS 5520 ASSN STD 2ND MATERIAL RESPONSE RETAINING RING AMS 5643N ASSN STD 3RD MATERIAL RESPONSE SECOND GEAR MIL-S-5059 MIL SPEC 4TH MATERIAL RESPONSE SPRING
CWWCCLAMPING SURFACE NOMINAL LENGTH0.2480 INCHES SECOND END
CWRSBORE NOMINAL DIAMETER0.2497 INCHES BOTH ENDS
STYLSTYLE DESIGNATORPROTRUDING HUB
AGJSPITCH DIAMETER6.0000 INCHES NOMINAL
CQFMHARDNESS RATING35.0 ROCKWELL C MINIMUM FIRST GEAR AND 40.0 ROCKWELL C MAXIMUM FIRST GEAR
CWCDNOMINAL OUTSIDE DIAMETER6.0417 INCHES
CWNHTOOTH FORMSTANDARD
CWQLNOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.3500 INCHES SECOND END
CWTRHUB STYLE DESIGNATORSPLIT SECOND END
CWTXHUB NOMINAL DIAMETER0.3120 INCHES SECOND END
CWWKPRECISION CLASSIFICATIONQUALITY NUMBER 12
MATTMATERIALSTEEL COMP 302 SPRING

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top