| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 7 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 2.8750 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.250 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 2.875 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0730 INCHES MINIMUM |
| ABPM | BODY DIAMETER | 3.031 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.625 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 4.500 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 3.0000 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 358.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 5.90 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 3.60 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.0025 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS ALL SECTIONS |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 0.0 7TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 345.0 2ND SECTION AND 345.0 2ND SECTION345.0 6TH SECTION AND 0.0 7TH SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 345.0 6TH SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1.00 TO 1.00 1ST SECTION AND-0.50 TO 0.50 2ND SECTION AND-0.50 TO 0.50 3RD SECTION AND-1.00 TO 1.00 4TH SECTION AND-1.00 TO 1.00 5TH SECTION AND-0.25 TO 0.25 6TH SECTION AND-0.50 TO 0.50 7TH SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | 150.0 TO 150.0 ALL SECTIONS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION AND 1 2ND SECTION1 6TH SECTION AND 1 7TH SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION AND 1 6TH SECTION AND 1 7TH SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 6TH SECTION |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 7TH SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 5.0 TO 5.0 1ST SECTION AND-5.0 TO 5.0 2ND SECTION AND-1.0 TO 1.0 3RD SECTION AND-5.0 TO 5.0 4TH SECTION AND-5.0 TO 5.0 5TH SECTION AND-5.0 TO 5.0 6TH SECTION AND-5.0 TO 5.0 7TH SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR AND 2ND SECTION GRAPH AND 3RD SECTION GRAPH AND 4TH SECTION SINGLE SIDED SQUARE AND 5TH SECTION GRAPH AND 6TH SECTION GRAPH AND 7TH SECTION GRAPH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | SECTIONS 1,4,AND 5 EACH HAVE A 5K OHM WIPER LOAD; SECTIONS 2,6,AND 7 EACH HAVE A RESISTANCE ELEMENT LOCATED ACROSS THE TAP |
| PMLC | PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TEST | TEST DATA DOCUMENT | 10001-2552844 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 24 TAB,SOLDER LUG |
