| MRC | Criteria | Characteristic |
|---|
| CQJX | NOMINAL THREAD SIZE | 1.688 INCHES 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.406 INCHES NOMINAL 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | WEATHERPROOF AND OIL RESISTANT |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.035 INCHES NOMINAL 2ND END |
| CQGH | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQBD | BURST TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.062 INCHES NOMINAL 2ND END |
| AAJD | THREAD CLASS | 2B 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AFQN | FLANGE LENGTH | 2.720 INCHES MINIMUM AND 2.780 INCHES MAXIMUM 2ND END |
| CQBB | (NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| AGFF | FLANGE WIDTH | 2.900 INCHES NOMINAL 2ND END |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 59.500 INCHES NOMINAL WORKING |
| ADJM | (NON-CORE DATA) INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| ADLH | (NON-CORE DATA) SECOND END FITTING SPEC/STD DATA | SAE J518, TABLE 1A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| SR-1 | MANUFACTURERS CODE | 19207 |
| CQBG | (NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AGAV | END ITEM IDENTIFICATION | 2350-01-390-4683 |
| CRBL | (NON-CORE DATA) SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| SR-1 | MFR SOURCE CONTROLLING REFERENCE | 12365278-62 |
| ADJS | EXTERIOR COLOR | BROWN |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END ELBOW 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE 2ND LAYER SPIRALLY LAID STEEL WIRE 3RD LAYER SPIRALLY LAID STEEL WIRE 4TH LAYER SPIRALLY LAID STEEL WIRE 5TH LAYER SPIRALLY LAID STEEL WIRE 6TH LAYER SPIRALLY LAID STEEL WIRE OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CRDW | HYDROSTATIC TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END PLAIN FACE FLANGE 2ND END |
| AARX | INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 16.500 INCHES |
| ADLF | (NON-CORE DATA) HOSE OR TUBING SPEC/STD DATA | SAE J517, 100R13, SIZE 20-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CQGM | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| ABKV | OUTSIDE DIAMETER | 1.960 INCHES NOMINAL |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CRZY | (NON-CORE DATA) SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| AHNC | CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
