| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| ABJH | TEMP RATING | 67.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.375 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 0.789 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| ADJM | UNABLE TO DECODE | UNABLE TO DECODE |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 317.0 |
| ADLF | UNABLE TO DECODE | UNABLE TO DECODE |
| ADLG | UNABLE TO DECODE | UNABLE TO DECODE |
| ADLH | UNABLE TO DECODE | UNABLE TO DECODE |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.156 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.156 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AFQN | FLANGE LENGTH | 1.610 INCHES NOMINAL 2ND END |
| AGFF | FLANGE WIDTH | 1.610 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.093 INCHES NOMINAL 2ND END |
| AJEE | RAISED FACE DIAMETER | 1.156 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | FLANGE STEEL COMP 304 ALL ENDS |
| AKXL | END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL 4TH END |
| AKXL | END FITTING COMPONENT AND MATERIAL | NUT STEEL COMP 304 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | SOCKET STEEL COMP 304 2ND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | UNION STEEL COMP 304 3RD END |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE PASSIVATE ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NUT PASSIVATE 1ST END |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SOCKET PASSIVATE 3RD END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQBB | UNABLE TO DECODE | UNABLE TO DECODE |
| CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CQBG | UNABLE TO DECODE | UNABLE TO DECODE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CQHW | UNABLE TO DECODE | UNABLE TO DECODE |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ACID RESISTANT AND ALCOHOL RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND SOLVENT RESISTANT AND SALT WATER RESISTANT |
| CRSM | VACUUM IN TORR | 254.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 39.000 INCHES NOMINAL WORKING |
| CRZY | UNABLE TO DECODE | UNABLE TO DECODE |
| CTCJ | FLANGE STYLE | RECTANGULAR INCLUDES SQUARE 2ND END |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC,POLYTETRAFLUOROETHYLENE |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
