| MRC | Criteria | Characteristic |
|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AASA | THREAD LENGTH | 0.563 INCHES NOMINAL FIRST END,THIRD PORTION |
| AASA | THREAD LENGTH | 0.938 INCHES NOMINAL SECOND END,THIRD PORTION |
| ABHP | OVERALL LENGTH | 12.375 INCHES NOMINAL |
| ABRR | KEYWAY WIDTH | 0.1875 INCHES NOMINAL FIRST END,THIRD PORTION |
| ABRR | KEYWAY WIDTH | 0.1875 INCHES NOMINAL SECOND END,THIRD PORTION |
| AGVN | UNABLE TO DECODE | UNABLE TO DECODE |
| AJYP | SCREW THREAD SERIES DESIGNATOR | SPECIAL FIRST END,THIRD PORTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | TWPP SECOND END,THIRD PORTION |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND FIRST END,THIRD PORTION |
| AKAF | SHAFT THREAD DIRECTION | RIGHT-HAND SECOND END,THIRD PORTION |
| BYFR | TEETH HARDNESS RATING | 55.3 ROCKWELL C MINIMUM AND 61.8 ROCKWELL C MAXIMUM |
| CFFB | WORM THREAD QUANTITY | 2 |
| CFFC | WORM THREAD LEAD | 0.586 INCHES NOMINAL |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 20.000 |
| CFFG | WORM HELIX ANGLE | 6 DEG 30 MIN |
| CFFK | WORM OUTSIDE DIAMETER | 1.805 INCHES NOMINAL |
| CFFL | WORM PITCH DIAMETER | 1.624 INCHES NOMINAL |
| CFFM | SHAFT HARDNESS RATING | C SCALE 24 |
| CFFN | WORM THREAD SECTION LENGTH | 3.000 INCHES NOMINAL |
| CFFP | WORM BODY LENGTH | 3.000 INCHES NOMINAL |
| CFFQ | WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | 0.563 INCHES NOMINAL FIRST END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.1875 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.325 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.375 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.500 INCHES NOMINAL SECOND END,FOURTH PORTION |
| CFFX | STRAIGHT UNTHREADED LENGTH | 1.625 INCHES NOMINAL SECOND END,FIFTH PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.7495 INCHES MINIMUM SECOND END,FIFTH PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.7500 INCHES NOMINAL SECOND END,FIFTH PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 0.999 INCHES MINIMUM SECOND END,FOURTH PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.001 INCHES NOMINAL SECOND END,FOURTH PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1809 INCHES MINIMUM FIRST END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.1815 INCHES MAXIMUM FIRST END,SECOND PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.406 INCHES NOMINAL FIRST END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.406 INCHES NOMINAL SECOND END,FIRST PORTION |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | 1.406 INCHES NOMINAL SECOND END,SECOND PORTION |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.1820 INCHES MINIMUM SECOND END,FIFTH PORTION |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | 0.1840 INCHES MAXIMUM SECOND END,FIFTH PORTION |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | 0.096 INCHES MINIMUM SECOND END,FIFTH PORTION |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | 0.108 INCHES NOMINAL SECOND END,FIFTH PORTION |
| MATT | MATERIAL | STEEL COMP 8620 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-16974,GRADE 8620 MIL SPEC SINGLE MATERIAL RESPONSE |
| ZZZV | FSC APPLICATION DATA | STEAM TURBINE |
